Did you complete the troubleshooter for the drive that still does not work? There are some registry entries that the troubleshooter does not fix and those "might" be the cause.
Check with your System Maker and Device maker for both possible firmware updates and the correct Registry entries for your drive. Be sure to ask for specific keys involved as well as the settings. Was this reply helpful? Yes No. Sorry this didn't help. Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory.
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. Windows cannot access this hardware because its service key information in the registry is missing or recorded incorrectly. Windows successfully loaded the device driver for this hardware but cannot find the hardware device. This problem occurs if you install a driver for a non-Plug and Play device, but Windows cannot find the device.
Windows cannot load the device driver for this hardware because there is a duplicate device already running in the system. A duplicate device was detected. This error occurs when a bus driver incorrectly creates two identically named sub-processes known as a bus driver error , or when a device with a serial number is discovered in a new location before it is removed from the old location.
One of the drivers controlling the device notified the operating system that the device failed in some manner. If you have already tried the "Try these steps first" section, check the hardware documentation or contact the manufacturer for more information about diagnosing the problem.
Currently, this hardware deviceis not connected to the computer. To fix this problem, reconnect this hardware device to the computer. This error occurs if a device that was previously connected to the computer is no longer connected. To resolve this problem, reconnect this hardware device to the computer. No resolution is necessary. This error code is only used to indicate the disconnected status of the device and does not require you to resolve it.
The error code resolves automatically when you connect the associated device to the computer. Windows cannot gain access to this hardware device because the operating system is in the processof shutting down. The hardware device should work correctly next time you start your computer.
The hardware device should work correctly next time that you start the computer. This error code is only set when Driver Verifier is enabled and all applications have already been shut down. Windows cannot use this hardware device because it has been prepared for safe removal, but it has not been removed from the computer.
To fix this problem, unplug this device from your computer and then plug it in again. This error code occurs only if you used the Safe Removal application to prepare the device for removal, or pressed a physical eject button. Unplug the device from the computer, and then plug it back in. Restart your computer if that doesn't resolve the error. The software for this device has been blocked from starting because it is known to have problems with Windows.
Contact the hardware vendor for a new driver. Contact the manufacturer of your hardware device to obtain the latest version or the updated driver.
Then, install it on your computer. Windows cannot start new hardware devices because the system hive is too large exceeds the Registry Size Limit. The system hive has exceeded its maximum size and new devices cannot work until the size is reduced. The system hive is a permanent part of the registry associated with a set of files that contains information related to the configuration of the computer on which the operating system is installed.
Configured items include applications, user preferences, devices, and so on. The problem might be specific devices that are no longer attached to the computer but are still listed in the system hive.
In Device Manager, click View , and then click Show hidden devices. You will now be able to see devices that are not connected to the computer.
Select a non-present device. On the Driver tab, choose Uninstall. Repeat step 3 for any non-present devices that you are no longer using. Then restart your computer. Windows cannot apply all of the properties for this device. Device properties may include information that describes the device's capabilities and settings such as security settings for example.
To fix this problem, you can try reinstalling this device. However,we recommend that you contact the hardware manufacturer for a new driver. This device is currently waiting on another device or set of devices to start.
There is currently no resolution to this problem. To help diagnose the problem, examine other failed devices in the device tree that this device might depend on. If you can determine why another related device did not start, you might be able to resolve this issue. Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
Download the latest driver from the hardware manufacturer's website, or contact the manufacturer for help. This device has been reserved for use by the Windows kernel debugger for the duration of this boot session. This is an intermittent problem code assigned while an ACPI reset method is being executed. If the device never restarts due to a failure, it will be stuck in this state and the system should be rebooted.
Update the device driver from Windows Update Update the hardware's device driver through Windows Update. Updated the device driver from the vendor's website Update the device driver from the vendor's website. If the device was preinstalled on the computer, visit the computer manufacturer's website. In Device Manager, double-click the device type that has the problem.
Code 1 "This device is not configured correctly. Code 1 ". Cause The device has no drivers installed on your computer, or the drivers are configured incorrectly. Recommended Resolutions Close some open applications If the computer has insufficient memory to run the device, you can close some applications to make memory available. Uninstall and reinstall the driver The device driver may have become corrupted.
Full error message "Windows cannot identifythis hardware because it does not have a valid hardware identification number. Recommended Resolutions Contact the hardware vendor. The hardware or the driver is defective. Full Error Message "This device cannot start. Code 10 " Cause Typically, the device's hardware key contains a "FailReasonString" value, and the value string is displays an error message defined by the hardware manufacturer. Recommended resolutions Update the driver In the device's Properties dialog box, click the Driver tab, and then click Update Driver to start the Hardware Update Wizard.
Code 12 "This device cannot find enough free resources that it can use Full Error Message This device cannot find enough free resources that it can use. You can follow the question or vote as helpful, but you cannot reply to this thread.
I have the same question Report abuse. Details required :. Cancel Submit. In reply to J W Stuart's post on December 27, Reboot your PC to save changes. If the problem still persists then follow the next step. Let the Windows install drivers and once complete close everything. Search Troubleshoot and click on Troubleshooting. Click and run the Troubleshooter for Hardware and Device.
Reboot to save changes and Windows will automatically install the default drivers for the USB. Now right-click on the first USB controller and then click on Uninstall. And after the restart Windows will automatically reinstall all the USB controllers that you uninstalled. Aditya is a self-motivated information technology professional and has been a technology writer for the last 7 years.
He covers Internet services, mobile, Windows, software, and How-to guides.
0コメント